Joyería online Pepe Lozano

1. The DrillSink should be used with a Variable speed motor, and the drill and countersink operations should be run at the appropriate speed for each process
2. Apply firm, steady feed pressure throughout the cut
3. Avoid lateral movement or tilting which can cause damage to the tool
4. Ensure regular application of quality cooling lubricant, especially when drilling thick or hardened materials.
5. Hardened or heat-affected materials may require higher torque, reduced RPM and feed rates and extra coolant
6. Ensure a debris free surface of sufficient steel thickness for strong magnet hold when Magnet Drilling.
7. Use at highest available Gear setting (for maximum torque) and use electronic tachometer to set RPM at recommended speed (or slower for difficult applications)
8. Best countersinking results are achieved using a variable speed drill that allows the correct speed to be set. Use at correct RPM (if unsure use tachometer to check drill speed)
9. Piloted Countersink Bits (like the MultiSink) will significantly increase countersinking performance preventing movement of the countersink whilst drilling.
10. Follow guidelines to set correct RPM speed. Incorrect RPM can lead to poor life or tool breakage

Use the table below to identify the recommended RPM for countersinking your hole size and material.

Click Here for Pilot Hole Drilling Speeds

VersaDrive tooling can be used with a wide range of adapters that allow the products to be used across a variety of drive tools depending on the application required.

Below you will find the recommended adapters for the VersaDrive 603070 Drillsink.