Sellos de Oro Hombre


Compra Sellos de Oro para Hombre al mejor precio

Sello de oro de ley 18k cuadrado, 18 gramos de peso
- 13%
desde €3,390.00 €3,900.00
18K SELLO ORO AMARILLO CABALLERO CON PIEDRA RUBI SPINEL 10X8 MM LATERAL TALLADO
- 16%
Sello de oro con cabeza de caballo
- 14%
€2,990.00 €3,500.00
18K SELLO ORO AMARILLO CABALLERO PIEDRA ZAFIRO SPINEL 10X8 MM LATERAL TALLADO
- 16%
Anillo de oro 18k con medusa y circonitas fondo ónix negro
- 15%
€1,190.00 €1,400.00
18K SELLO ORO AMARILLO CADETE HUECO ANCHO 8.5X7.5 MM
- 22%
€349.00 €449.00
18K SELLO CABALLERO ORO AMARILLO ROLEX HUECO 11X11 MM
- 11%
€749.00 €849.00
Solitario de oro de ley 18k de caballero
- 25%
Sello de oro de ley 18k ovalado con piedra rubí rojo.
- 10%
€889.00 €990.00
Sello de caballero cuadrado grande.
- 17%
desde €1,890.00 €2,300.00
Sello de oro de ley 18k macizo con hoja
- 11%
€3,900.00 €4,400.00
Sello CUADRADO tallado oro 18k mano
- 10%
desde €859.00 €959.00
Sello ovalado tallado oro 18k
- 19%
desde €449.00 €559.00
Sello tallado oro 18k cadete
- 22%
€349.00 €450.00
18K SELLO CADETE HUECO CON GRABADO DE CHEVRONES EN EL LATERAL
- 22%
€349.00 €450.00
18K SELLO ORO AMARILLO CON CABALLOS ENTRELAZADOS MACIZO
- 12%
€4,390.00 €5,000.00
18K SELLO ORO AMARILLO CUADRADO CON TALLADOS EN EL LATERAL macizo 24 gramos
- 11%
€3,990.00 €4,500.00
Sello de oro medusa redondo con cerco de greca y circonitas con dibujo lateral
- 14%
€2,990.00 €3,500.00
Sello de oro medusa redondo grande con cerco de greca y circonitas
- 7%
€2,690.00 €2,900.00
Sello de oro medusa redondo con circonitas con grabado de greca
- 12%
€2,990.00 €3,400.00

Nuestros sellos de oro para hombre son una joya clásica y distinguida que siempre ha sido un símbolo de buen gusto y sofisticación. En Pepe Joyeros, trabajamos con los mejores materiales de alta calidad para garantizar que cada pieza sea única y duradera.

Catálogo de sellos de oro de hombre y solitarios

Te presentamos la colección de sellos de oro para hombre de 18K, símbolo de grandeza, riqueza y honor, donde podrás elegir entre piezas huecas y sellos de oro macizo.

Agrega un toque personal y distintivo a tu estilo con un sello de oro para hombre de Pepe Joyeros. Ya sea para ocasiones formales o informales, nuestros sellos de oro para hombre son una excelente opción para aquellos que buscan una joya sofisticada y duradera que nunca pasa de moda.

Sellos de oro 18K para hombre de diseños exclusivos

Si buscas una joya que sea sinónimo de calidad y distinción, los sellos de oro 18K para hombre de Pepe Joyeros son la opción ideal.
No solo contamos con diseño exclusivos para hombre, también tenemos anillos de oro blanco para mujer. ¡Descúbrelos ahora!

Cada sello está cuidadosamente elaborado con los más altos estándares de calidad y precisión por nuestros expertos joyeros, utilizando solo los mejores materiales.

Obtén tu sello de oro de hombre con envío gratuito

En Pepe Joyeros, ofrecemos servicios adicionales para que puedas adquirir tus sellos de oro 18K para hombre de manera cómoda y segura.

Disfruta de envío gratuito, financiamiento sin intereses y opciones de pago seguro para una experiencia de compra satisfactoria.

Nuestro equipo de atención al cliente está siempre disponible para ayudarte en cualquier duda que puedas tener.

Descubre nuestra colección en línea de sellos de oro de hombre y aprovecha nuestros servicios adicionales para obtener la joya perfecta para ti.

Descubre nuestra amplia variedad de Anillos de Oro. Encuentra la elección perfecta con Pepe Lozano Joyeros.


VersaDrive Reamers - Metric

VersaDrive Reamer FAQ Section
+
Q: Can I use my impact wrench with VersaDrive Reamers
Yes, VersaDrive Reamers are specially hardened and designed with a unique geometry which allows them to be effectively used with Impact Drivers and Wrenches.

Q: What is the maximum size I can increase a hole with one Versadrive reamer
The maximum size hole enlargement we recommend for each diameter of reamer is 2-3mm. This is because the as the diameter of the reamer increases the cutting forces get greater and increase the tool wear and load on the tool itself which increases the risk of wear or even failure

Q: Can I Ream laser/flame cut holes using Impact
Reaming Flame Cut or Laser Cut holes or even punched holes with reamers using Impact wrenches may significantly reduce the tool life due to the surface hardening that takes place around the perimeter of the hole. Often these holes are roughly cut or may not be parallel which is also likely to cause breakage. If possible, we suggest reaming the hole using a slow speed Magnet Drill or other drilling machine, to remove the surface hardness and ensure an accurate hole.

Q: Can I use Versadrive Reamers for stainless and other hard materials.
Versadrive eamers are suitable for reaming stainless steel when used at lower RPM speeds in rotary drills. They can be used for drilling Stainless Steel with an Impact wrench, however reduced life expectancy would be expected. TurboTip Reamers are not intended for use on Hardox and other wear plate materials. For optimum tool life We recommend using reduced rotary RPM speeds, higher pressure and increased lubrication.

Q: Why has my reamer chipped on the flutes
This is classic sign of "chatter" caused by the reamer vibrating unevenly against the workpiece rather than smoothly cutting. To avoid this, gently increase pressure (without forcing or jamming the tool) to ensure the reamer is cutting equally at each point of the circumference,

Q: Which lubricant do you recommend for Reamers
Speedlube is generally the best all purpose lubricant, for fast, convenient and accurate aerosol application ensuring coverage inside the hole as well as on the tool. However our BioCut paste is very popular and efficient lubricant for dipping the tool directly into the tin. It’s also great for minimising run off or mess, on painted surfaces or other sensitive applications where run off is to be avoided. Aeropaste can be used if working in applications such as Overhead where a fluid lubricant will run off. Finally BioCut Blue cutting fluid works particularly well with harder materials or difficult applications and is ideal forfor direct application onto the tool and into the hole when working on flat surfaces

Q: Can I use my impact wrench to enlarge holes in Stainless Steel using the VersaDrive or ImpactaMag Reamers
Yes, although we recommend the use of a low speed, rotary drill or Magnet Drill for optimum life expectancy in stainless steel. Reamers can be used on impact for Stainless steel to speed the job up but reduced life expectancy would be expected

Q: Can I use HMT Reamers to ream through misaligned (half) holes
Yes, this is a typical application for VersaDrive or ImpactaMag reamers. The Tapered reamer will follow the path of the top hole to open up the overlapping hole, along the fixing to pass through both plates

Q: When will a reamer go blunt
Typically speaking if the tool has blunted sooner than you would have expected it to, the typical cause is using too high an RPM for the particular application causing the tool to wear and blunt prematurely. When used at recommended RPM and torque limits and all best practice is followed, you should expect excellent tool life.

Q: Are these reamers likely to break
Reamers will generally only break if too high feed pressure (force) has been used, causing the reamer to jam in the hole, and ultimately to break.

Q: Can VersaDrive/ImpactaMag Reamers be resharpened
They can be resharpened by dedicated resharpening companies using tool grinding machines. We do not offer this service directly but we can recommed resharpening companies

Q: How can i access further technical support or submit a warranty claim for my VersaDrive Reamer
Please click here to access our product support area and warranty claim forms. If making a warranty claim please fill in the appropriate warranty form, providing us with as much of the requested information as possible and one of our technical team will review the feedback and be in touch shortly.
1. Best Practice Advice - How to get the best out of your 501030 Impact Reamers
+
  1. Apply firm, steady feed pressure throughout the cut, applying the feed very slowly and cautiously during the first 1mm of cut.
  2. To maximise tool life do not attempt to increase the existing hole diameter beyond 2-3mm. If a larger, finished hole size is required, then the next size reamer should be used to ‘step up’ until the finished hole diameter is reached.
  3. Avoid lateral movement or tilting which can cause damage to the tool
  4. Ensure regular application of quality cooling lubricant, especially when drilling thick or hardened materials.
  5. Flame cut, laser cut or punched holes may not be possible to ream with impact wrench. In this situation the hole can be reamed out with a slow speed Magnet Drill with a ImpactaMag or VersaDrive reamer.
  6. Follow guidelines to set correct RPM speed. Incorrect RPM can lead to poor life or tool breakage.
  7. Ensure a debris free surface of sufficient steel thickness for strong magnet hold when Magnet Drilling.
  8. Regularly check that Magnet Drill slides, handles, arbors and movable parts have not vibrated loose over time.
2. Torque / RPM guide - Best Torque & RPM values for different sizes of hole and applications.
+

Use the tables below to identify the recommended Nm of Torque or RPM for your hole size and material.

Use Nm of Torque for reaming with Impact tooling.

Use RPM for reaming with Rotary tooling.

N.B. Impact Torque recommendations are the minimum required and for most applications additional torque is a benefit. For Impact applications where Torque values available do not offer an exact match to the table below select the closest available torque setting ABOVE the recommendation.


3. Powertool recommendations on Mild Steel
+

VersaDrive tooling can be used with a wide range of adapters that allow the products to be used across a variety of drive tools depending on the application required.

Below you will find the recommended adapters for the VersaDrive 501030 Reamer.


4. How to decide which Impact Wrench or Impact Driver to use?
+
  1. Identify the torque range (for the cutting tool) required using the data sheet in question 2. (Example 16mm hole in 12mm plate – Guide torque 340Nm)
  2. Identify the torque range on your impact wrench or impact driver
  3. Look up model number to see torque range
  4. Check if there are speed/torque settings on the tool - Example
  5. Select the closest torque setting on the impact wrench/impact driver ABOVE the torque recommendation
    (this is for the following 2 reasons)
    - Higher torque will only be used on demand
    - Too low torque will lead to the tool jamming or even snapping as the flutes stop cutting and the torque transfers to the tool
5. Key Dimensions
+
reamer key dimensions